Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente Prochaine révision Les deux révisions suivantes | ||
documentation:hardware_drivers_ui_tools:bcnc-autolevel [2017/10/08 10:05] admin |
documentation:hardware_drivers_ui_tools:bcnc-autolevel [2017/10/08 10:41] admin [7. Nivelage automatique] |
||
---|---|---|---|
Ligne 1: | Ligne 1: | ||
- | ====== bCNC - AutoLevel ====== | ||
- | \\ | + | ====== Gravure de PCB - procédure avec nivelage automatique ====== |
- | \\ | + | |
+ | //[[https://github.com/vlachoudis/bCNC/wiki/PCB-101-First-time]]// | ||
//[[https://github.com/vlachoudis/bCNC/wiki/AutoLevel]]// | //[[https://github.com/vlachoudis/bCNC/wiki/AutoLevel]]// | ||
Ligne 10: | Ligne 9: | ||
- | + | ===== 1. Nettoyez la face cuivre du PCB ===== | |
- | ===== Gravure de PCB - procédure avec nivelage automatique ===== | + | |
- | + | ||
- | //[[https://github.com/vlachoudis/bCNC/wiki/PCB-101-First-time]]// | + | |
- | + | ||
- | + | ||
- | ==== 1. Nettoyez la face cuivre du PCB ==== | + | |
Avec de la laine de verre ou un papier abrasif, genre 400. | Avec de la laine de verre ou un papier abrasif, genre 400. | ||
- | ==== 2. Fixez le PCB sur le martyr ==== | + | \\ |
+ | ===== 2. Fixez le PCB sur le martyr ===== | ||
Le PCB doit être maintenu bien à plat. Utilisez des brides. Le double face fonctionne aussi. | Le PCB doit être maintenu bien à plat. Utilisez des brides. Le double face fonctionne aussi. | ||
- | ==== 3. Montez le premier foret sur la broche ==== | + | \\ |
+ | ===== 3. Montez le 1er foret sur la broche ===== | ||
- | ==== 4. Alumez la CNC et démarrez bCNC ==== | + | \\ |
+ | ===== 4. Alumez la CNC et démarrez bCNC ===== | ||
- | ==== 5. Dans bCNC connectez la CNC ==== | + | \\ |
+ | ===== 5. Dans bCNC connectez la CNC ===== | ||
* Sélectionnez le menu **Fichier**. | * Sélectionnez le menu **Fichier**. | ||
* Sélectionnez le **port série**. | * Sélectionnez le **port série**. | ||
Ligne 37: | Ligne 34: | ||
* Cliquez le bouton **Débloquer**. | * Cliquez le bouton **Débloquer**. | ||
- | + | \\ | |
- | ==== 6. Préparez le nivelage automatique ==== | + | ===== 6. Préparez le nivelage automatique ===== |
* Sélectionnez le menu **Fichier**. | * Sélectionnez le menu **Fichier**. | ||
* Charger le fichier gcode du contour de votre circuit, cela permettra de sélectionner simplement la zone à tester pour la mise à niveau automatique. | * Charger le fichier gcode du contour de votre circuit, cela permettra de sélectionner simplement la zone à tester pour la mise à niveau automatique. | ||
Ligne 54: | Ligne 51: | ||
- | ==== 7. Nivelage automatique ==== | + | \\ |
+ | ===== 7. Nivelage automatique ===== | ||
* Dans le menu **Sonde** et le sous menu **Nivelage automatique**. | * Dans le menu **Sonde** et le sous menu **Nivelage automatique**. | ||
* Cliquez sur le bouton **Marges**. Cela va configurer automatiquement une zone de nivelage automatique calquée sur les limites de votre fichier gcode. Cette zone est représenté par une grille. | * Cliquez sur le bouton **Marges**. Cela va configurer automatiquement une zone de nivelage automatique calquée sur les limites de votre fichier gcode. Cette zone est représenté par une grille. | ||
* Dans la section **Nivelage automatique**, vous pouvez ajuster le nombre de points X/Y testés en modifiant les valeurs N. Les champs **pas** indiquent l'espacement des points à tester. | * Dans la section **Nivelage automatique**, vous pouvez ajuster le nombre de points X/Y testés en modifiant les valeurs N. Les champs **pas** indiquent l'espacement des points à tester. | ||
- | * set Z Min to -10 and Z Max to 0.5 - if you expect a large deviation in height across the board, set Z max to a higher value ( and perhaps consider leveling waste board and/or machine) | + | * Renseignez Z Min à -10 et Z Max à 0.5. Dans le cas d'une grande déviation en hauteur sur la longueur du circuit, mettez une plus grande valeur dans Z max (et peut-être il faudra penser à surfacer le martyr et/ou remettre à niveau la machine) |
- | * **CONFIRM PROBE CLIPS TO PCB AND TOOL BIT - FAILURE TO DO SO BEFORE PROCEEDING MAY RESULT IN A DAMAGED BIT.** | + | * Important : **Vérifiez que les pinces de sonde sont bien fixées au PCB et au foret**. |
- | * Click on Scan | + | * Dans le menu **Sonde** et le sous menu **Nivelage automatique** cliquez sur le bouton **Scanner** : La machine vient tester chaque point. |
- | * Return to X/Y zero - in Command: (at bottom) enter G0 X0 Y0 | + | * Retournez au zéro X/Y. Dans le champ **Commande** (tout en bas) tappez : **G0 X0 Y0** |
- | * Return to Z zero - in Command: (at bottom) enter G0 Z0 | + | * Retournez au zéro Z. Dans le champ **Commande** (tout en bas) tappez : **G0 Z0** |
- | * At top click at "Zero" in menu for Autolevel to adjust measured values (@vlachoudis: why this is required?) | + | * Dans le menu **Sonde** et le sous menu **Nivelage automatique** cliquez sur le bouton **Zéro** pour valider le scan. |
- | * REMOVE PROBE CONNECTION TO TOOL BIT. | + | * **Retirez les pinces de sonde**. |
- | ==== 9. Load first Drill gcode file ==== | + | |
+ | |||
+ | \\ | ||
+ | ===== 9. Load first Drill gcode file ===== | ||
* Under File menu select Open and select drill file | * Under File menu select Open and select drill file | ||
* Answer no to the "Probe File modified" dialog | * Answer no to the "Probe File modified" dialog | ||
* Answer no to the "Existing Autolevel" dialog | * Answer no to the "Existing Autolevel" dialog | ||
* Optional - Select ISO view from "Change viewing Angle" widget. | * Optional - Select ISO view from "Change viewing Angle" widget. | ||
- | ==== 10. Perform Drilling operation ==== | + | |
+ | |||
+ | \\ | ||
+ | ===== 10. Perform Drilling operation ===== | ||
* Confirm that you've REMOVED THE PROBE CONNECTION TO THE TOOL BIT. | * Confirm that you've REMOVED THE PROBE CONNECTION TO THE TOOL BIT. | ||
* If manually controlling power to your router, turn it on now. | * If manually controlling power to your router, turn it on now. | ||
Ligne 76: | Ligne 80: | ||
* Click on Start. | * Click on Start. | ||
* When drilling is complete, if manually controlling power to your router, turn it off. | * When drilling is complete, if manually controlling power to your router, turn it off. | ||
- | ==== 11. Change Tool Bit - Do this every time you change a bit, whether it be a drill, routeing, or engraving bit ==== | + | |
+ | |||
+ | \\ | ||
+ | ===== 11. Change Tool Bit - Do this every time you change a bit, whether it be a drill, routeing, or engraving bit ===== | ||
* Raise Z to comfortable height using jog controls. | * Raise Z to comfortable height using jog controls. | ||
* Replace Tool bit | * Replace Tool bit | ||
Ligne 88: | Ligne 95: | ||
* Raise Z by 1mm using jog controls. | * Raise Z by 1mm using jog controls. | ||
* REMOVE PROBE CONNECTION TO TOOL BIT. | * REMOVE PROBE CONNECTION TO TOOL BIT. | ||
- | ==== 12. If performing more Drilling operations, follow steps 10-12, with final Tool bit change being to the trace routing bit ==== | + | |
- | ==== 13. Load trace routing gcode file ==== | + | |
+ | \\ | ||
+ | ===== 12. If performing more Drilling operations, follow steps 10-12, with final Tool bit change being to the trace routing bit ===== | ||
+ | |||
+ | |||
+ | \\ | ||
+ | ===== 13. Load trace routing gcode file ===== | ||
* Under FIle menu select Open and select trace routing gcode file | * Under FIle menu select Open and select trace routing gcode file | ||
* Answer no to the "Probe File modified" dialog | * Answer no to the "Probe File modified" dialog | ||
* Answer no to the "Existing Autolevel" dialog | * Answer no to the "Existing Autolevel" dialog | ||
* Optional Select preferred viewing angle. | * Optional Select preferred viewing angle. | ||
- | ==== 14. Change Tool Bit per step 11 ==== | + | |
- | ==== 15. Perform Trace Routing operation ==== | + | |
+ | \\ | ||
+ | ===== 14. Change Tool Bit per step 11 ===== | ||
+ | |||
+ | |||
+ | \\ | ||
+ | ===== 15. Perform Trace Routing operation ===== | ||
* Confirm that you've **REMOVED THE PROBE CONNECTION TO THE TOOL BIT.** | * Confirm that you've **REMOVED THE PROBE CONNECTION TO THE TOOL BIT.** | ||
* If manually controlling power to your router, turn it on now. | * If manually controlling power to your router, turn it on now. | ||
Ligne 101: | Ligne 120: | ||
* Click on Start. | * Click on Start. | ||
* When routing is complete, if manually controlling power to your router, turn it off. | * When routing is complete, if manually controlling power to your router, turn it off. | ||
- | ==== 16. Load Outline routing gcode file ==== | + | |
+ | |||
+ | \\ | ||
+ | ===== 16. Load Outline routing gcode file ===== | ||
* Under FIle menu select Open and select outline routing gcode file | * Under FIle menu select Open and select outline routing gcode file | ||
* Answer no to the "Probe File modified" dialog | * Answer no to the "Probe File modified" dialog | ||
* Answer no to the "Existing Autolevel" dialog | * Answer no to the "Existing Autolevel" dialog | ||
* Optional - Select preferred viewing angle. | * Optional - Select preferred viewing angle. | ||
- | ==== 17. Change Tool Bit per step 12 ==== | + | |
- | ==== 18. Perform outline Routing operation ==== | + | |
+ | \\ | ||
+ | ===== 17. Change Tool Bit per step 12 ===== | ||
+ | |||
+ | |||
+ | \\ | ||
+ | ===== 18. Perform outline Routing operation ===== | ||
* Confirm that you've **REMOVED THE PROBE CONNECTION TO THE TOOL BIT.** | * Confirm that you've **REMOVED THE PROBE CONNECTION TO THE TOOL BIT.** | ||
* If manually controlling power to your router, turn it on now. | * If manually controlling power to your router, turn it on now. |